GRAM & JUHL ANNOUNCEMENT

30th March 2009

Integration with Gram & Juhl TCM System

Macom Techologies today announced the integration of their TechAlert 10 Wear Debris Sensor with the Gram & Juhl TCM System.
The TCM System is now able to incorporate data from the Macom TechAlert 10 sensor as standard measurements. The TechAlert 10 detects wear debris in the lubrication oil and provide valuable complementary information to be correlated with the vibration analysis recorded in the TCM® System. As with all standard TCM measurements, the data obtained from TechAlert 10 is tagged with process parameters available in the TCM System.

For further information about the Gram & Juhl TCM System visit their website at www.gramjuhl.dk

MATHER WELCOMES DEAL FOR SCOTTISH COMPANY TO SUPPLY HI-TECH COMPONENT TO U.S. WIND TURBINES

Enterprise Minister Jim Mather today welcomed news that a Scottish company has entered into an agreement to provide hi-tech components for hundreds of wind turbines in America .
On a visit to the United States , the Minister said that Glasgow-based Macom would be supplying hundreds of ‘TechAlert 10’ sensors to the fast-growing wind turbine manufacturer and developer Clipper Windpower, to monitor performance of wind turbines that will be deployed in the USA over the coming two years.

FOR FURTHER INFORMATION PLEASE CLICK HERE

EARLY DETECTION OF GEARBOX FAILURE

Following on from the installation of multiple Macom TechAlertTM, on-line condition monitoring sensors on a UK wind farm, two turbines were found to have wear related faults leading to the shut down of both turbines. Detailed investigation showed damage to both the High speed generator end inboard bearing and the Planetary gear. The damage and therefore the failure have been caught early enough so as not to cause further damage to the remaining bearings and gearbox with the hope that reconditioning of the
gearbox will suffice rather than a complete replacement.

FOR FURTHER INFORMATION PLEASE CLICK HERE

MACOM TECHNOLOGIES LTD WILL BE EXHIBITING AT HUSUMWIND, HUSUM, GERMANY FROM THE 9TH - 13TH SEPTEMBER 2008 

We look forward to your visit to our stand 4A20 and are looking forward to welcoming you and applying our insight and technology to your Condition & Maintenance Monitoring requirements.
As Macom continues to expand its client base, we have expanded our range of integration solutions, bringing about a technological application which enables our clients to better monitor, maintain and optimise their capital equipment investment.
If maintenance, efficiency, output, the economics and Return-on-Investment are in any way important to you, then we might well be the right CM system supplier for you.

MACOM TECHNOLOGIES LTD WILL BE EXHIBITING AT AWEA, HOUSTON, TEXAS, FROM THE 1ST-4TH JUNE 2008

We look forward to your visit to our stand 2749 and are looking forward to welcoming you and applying our insight and technology to your Condition & Maintenance Monitoring requirements.
As Macom continues to expand its client base, we have expanded our range of integration solutions, bringing about a technological application which enables our clients to better monitor, maintain and optimise their capital equipment investment.
If maintenance, efficiency, output, the economics and Return-on-Investment are in any way important to you, then we might well be the right CM system supplier for you.

MACOM TECHNOLOGIES LTD WILL BE EXHIBITING AT THE ALL-ENERGY EXHIBITION, ABERDEEN FROM THE 21ST-2ND MAY2008

We look forward to your visit to our stand B7 and are looking forward to welcoming you and applying our insight and technology to your Condition & Maintenance Monitoring requirements.
As Macom continues to expand its client base, we have expanded our range of integration solutions, bringing about a technological application which enables our clients to better monitor, maintain and optimise their capital equipment investment.
If maintenance, efficiency, output, the economics and Return-on-Investment are in any way important to you, then we might well be the right CM system supplier for you.

MACOM TECHNOLOGIES LTD WILL BE EXHIBITING AT NORIA, NASHVILLE, TN FROM THE 20TH-22ND MAY 2008
 
We look forward to your visit to our stand 926 and are looking forward to welcoming you and applying our insight and technology to your Condition & Maintenance Monitoring requirements.
As Macom continues to expand its client base, we have expanded our range of integration solutions, bringing about a technological application which enables our clients to better monitor, maintain and optimise their capital equipment investment.
If maintenance, efficiency, output, the economics and Return-on-Investment are in any way important to you, then we might well be the right CM system supplier for you.

MACOM TECHNOLOGIES LTD WILL BE EXHIBITING AT MAINTEC, BIRMINGHAM, UK FROM THE 11TH-13TH MARCH 2008

We look forward to your visit to our stand and are looking forward to welcoming you and applying our insight and technology to your Condition & Maintenance Monitoring requirements.
As Macom continues to expand its client base, we have expanded our range of integration solutions, bringing about a technological application which enables our clients to better monitor, maintain and optimise their capital equipment investment.
If maintenance, efficiency, output, the economics and Return-on-Investment are in any way important to you, then we might well be the right CM system supplier for you.

TECHALERT SYSTEM DETECTS BEARING WEAR

Following on from the installation of a TechAlert system on an Airtricity owned turbine early stage wear has been detected on the intermediate bearing leading to it’s replace and the saving of thousands of pounds in collateral damage.

 
FOR FURTHER INFORMATION CLICK HERE

MACOM MOVE TO BIGGER PREMISES

Due to Macom’s continued growth we have moved to bigger premises not only to accommodate a growing engineering department but also to give us larger laboratory/testing space but also a dedicated assembly and packaging area.
This extra space gives Macom the capability to develop products quicker and grow it’s business.
We would extend an invitation to all our clients and suppliers to visit.

MACOM RECRUIT NEW ELECTRONIC DESIGN ENGINEER

Macom are pleased to announce the arrival of Julian Franchitti who has joined our engineering staff as of October 2007.
Julian comes to Macom straight from University after successfully completing a B.Eng (Hons) in Electrical and Electronic Engineering (with music).
Julian’s first project is to develop on-board Ethernet capability for the TechAlert 10 which currently uses an external module.